JOURNAL

47. Jewhan Lee, Namhyeong Kim, Jung Yoon, Gyeongseo Im, Jaehyuk Eoh, HangJin Jo, Hyungmo Kim, "Design evaluation of serpentine-tube integrated steam generator for sodium-cooled fast reactor", Annals of Nuclear Energy, 213, 111133, 2025 (Corresponding author)

46. Hayeol Kim, Junyoung Seo, Adrian Matias Chung Beak, Woo Yeong Shin, Hongryung Jeon, Seung Ki Moon, Hyungmo Kim, Namhun Kim and Im Doo Jung, "Direct energy deposition for smart micro reactor", Virtual and Physical Prototyping, 19, 2024 (Corresponding author)

45. Jewhan Lee, Dehee Kim, Jaehyuk Eoh, and Hyungmo Kim, "Heat Transfer Performance Tests of a Circular-Fin Sodium-to-Air Heat Exchanger for Sodium-Cooled Fast Reactors", International Jouranl of Energy Research, 5476053, p.11, 2024 (Corresponding author)

44. Sanghyun Lee, Hyewon Kim, Hyewon Lim, Yejin Nam, Sangmin Lee, and Hyungmo Kim, "Nanostructured Substrate-Mediated Bubble Degassing in Microfluidic Systems", Langmuir, 40, p.8630-8635, 2024 (Corresponding author)

43. Seyeon Hwang, Hyewon Kim, Hyeonmin Choi, Taejoon Kim and Hyungmo Kim, "Design Evaluation of an immersion heater using a fluid with low Prandtl number based on computation fluid dynamics analysis", Journal of Mechanical Science and Technology, 38(4), p.2151-2159, 2024 (Corresponding author)

42. Jewhan Lee, Jaehong Min, Jung Yoon and Hyungmo Kim, "Experimental study of the natural convection characteristics of finned-tube sodium-to-air heat exchanger", Journal of Mechanical Science and Technology, 38(4), p.2055-2062, 2024 (Corresponding author)

41. Yong-Taek Kwon, Sanghyun Jeon, Jun Lee, Juheon Kim, Sangmin Lee, and Hyungmo Kim, "Performance Improvement of an STS304-Based Dispensing Needle via Electrochemical Etching", Micromachines, 14, 2183, p.2-12, 2023 (Corresponding author)

40. Dahoon Jeong, Seyeon Hwang, Hyewon Kim, Juheon Kim, Hyungmo Kim, "Experimental investigation of non-condensable gas effects in a natural circulation system", Journal of Mechanical Science and Technology, 37(11),  p.6057-6064, 2023 (Corresponding author)

39. Jewhan Lee , Da-Young Gam, Ki Ean Nam, Seong J. Cho, Hyungmo Kim, "Feasibility study of a resistive-type sodium aerosol detector with ZnO nanowires for sodium-cooled fast reactors", Nuclear Engineering and Technology, 55, p. 2373-2379, 2023 (Corresponding author)

38. Jewhan Lee, Jaehyuk Eoh, Jung Yoon, Seok-Kwon Son, Hyungmo Kim, "Heat transfer system design of sodium test facility STELLA-2", Annals of Nuclear Energy, 191, 109930, 2023

37. Namhyeong Kim, Jung Yoon, Jaehyuk Eoh, Moo Hwan Kim, HangJin Jo, Hyungmo Kim, "Design and Thermal-Hydraulic Evaluation of Integrated Steam Generator with Serpentine-Tube Configuration for Prevention of Sodium-Water Reaction", International Journal of Energy Research, 2825626, 2023 (Corresponding author)

36. Hayeol Kim, Jewhan Lee, Taekyeong Kim, Seong Jin Park , Hyungmo Kim, Im Doo Jung, " Advanced thermal fluid leakage detection system with machine learning algorithm for pipe-in-pipe structure", Case Studies in Thermal Engineering, 42, 102747, 2023 (Corresponding author)

35. Jung Yoon, Jewhan Lee, Jaehyuk Eoh, Hyungmo Kim, Dong Eok Kim, "Similarity evaluation of the pump simulation loop in STELLA-2 for conservation of mechanical sodium pump characteristics", Nuclear Engineering and Technology, 55, p. 353-363, 2023

34. Byeong-Yeon Kim, Jewhan Lee, Youngil Cho, Jaehyuk Eoh, Hyungmo Kim, "Performance test and uncertainty analysis of the FBG-based pressure transmitter for liquid metal system",  Nuclear Engineering and Technology,  54, p. 4412-4421, 2022

33. Jewhan Lee, Jaehyuk Eoh, Jung Yoon, Seok-Kwon Son, Hyungmo Kim, "Design of large-scale sodium thermal-hydraulic integral effect test facility, STELLA-2",  Nuclear Engineering and Technology,  54, p. 3551-3566, 2022

32. Sun Rock Choi, Hyungmo Kim, Seok-Kyu Chang, Hae Seob Choi, Dong-Jin Euh, Hyeong-Yeon Lee, Won Sik Yang, "Assessment of subchannel flow mixing coefficients for wire-wrapped hexagonal fuel rod bundles", Annals of Nuclear Energy, 166, p. 108810, 2022

31. Namhyeong Kim, Hyungmo Kim, Jaehyuk Eoh, Moo Hwan Kim, HangJin Jo, “Thermal-hydraulic design of natural circulation integratedsteam generator using design map”, Applied Thermal Engineering, 197, p. 117389, 2021

30. Jung Yoon, Jewhan Lee, Hyungmo Kim, Yong-Bum Lee, Jaehyuk Eoh, “Heat transfer characteristics of redan structure in large-scale test facility STELLA-2”, Nuclear Engineering and Technology, 53(4), p. 1109-1118, 2021

29. Hyungmo Kim, Jung Yoon, Hyeong-Yeon Lee, Jaehyuk Eoh, Ji-Young Jeong, Jewhan Lee, “Design and thermal-hydraulic evaluation of the finned-tube type sodium-to-air heat exchanger in a sodium test facility”, Nuclear Engineering and Design , 366, p. 110755, 2020

28. Namhyeong Kim, Hyungmo Kim, Jaehyuk Eoh, Moo Hwan Kim, HangJin Jo, “One-dimensional design approach to integrated steam generator with helical-coil tube bundles for a sodium-cooled fast reactor”, Nuclear Engineering and Design , 361, p. 110554, 2020

27. Seolha Kim, Usung Park, Hyungmo Kim, “Early stage of liquid drop spreading on tunable nanostructured surfaces”, Experimental Thermal and Fluid Science, 116, p. 110126, 2020 (Corresponding author) 

26. Seolha Kim, Dongseob Kim, Hyungmo Kim, “Effect of wettability on the water entry problem of aluminum spheres”, Journal of Mechanical Science and Technology, 34(3), pp. 1257-1263, 2020 (Corresponding author) 

25. Aeree Kim, Seonghyeon Kim, Myoung Huh, Hyungmo Kim, Chan Lee, “Superior anti-icing strategy by combined sustainable liquid repellence and electro/photo-responsive thermogenesis of oil/MWNT composite”, Journal of Materials Science & Technology, 49, pp. 106-116, 2020

24. Seol Ha Kim, Gicheol Lee, Hyungmo Kim, Moo Hwan Kim, “Leidenfrost point and droplet dynamics on heated micropillar array surface”, International Journal of Heat and Mass Transfer, 139, pp. 1-9, 2019

23. Jewhan Lee, Hyungmo Kim, Jaehyuk Eoh, Yohan Jung, Ji-Woong Han, Ji-Young Jeong, “Experimental study of sodium heat exchanger performance at high Pe number condition using STELLA-1 facility”, Nuclear Engineering and Design, 340, pp. 62-67, 2018 (Corresponding author) 

22. Joo Hyun Park, Jung Yoon, Jaehyuk Eoh, Hyungmo Kim, Moo Hwan Kim, “Optimization and sensitivity analysis of the nitrogen Brayton cycle as a power conversion system for a sodium-cooled fast reactor”, Nuclear Engineering and Design, 340, pp. 325-334, 2018

21. Seol Ha Kim, Yuyan Jiang, Hyungmo Kim, “Droplet impact and LFP on wettability and nanostructured surface”, Experimental Thermal and Fluid Science, 99, pp. 85-93, 2018 (Corresponding author) 

20. Sun-Joon Byun, Chang-Hwan Shin, Jung Yoon, Hyungmo Kim, Jewhan Lee, Jaehyuk Eoh, Ji-Young Jeong, “Experimental study on the heat transfer enhancement in sub-channels of 6 × 6 rod bundle with large scale vortex flow mixing vanes”, Nuclear Engineering and Design, 339, pp. 105-115, 2018

19. Jewhan Lee, Jaehyuk Eoh, Hyungmo Kim, Jung Yoon, Yong-Bum Lee, Eui-Kwang Kim, Jae-Ho Jeong, Kwi Lim Lee, Ju-Young Jeong, “Design evaluation of large-scale sodium integral effect test facility (STELLA-2) using MARS-LMR”, Annals of Nuclear Energy, 120, pp. 845-856, 2018

18. Hyungmo Kim, and Seol Ha Kim, “Nonwettable Hierarchical Structure Effect on Droplet Impact and Spreading Dynamics”, Langmuir, 34, 2018

17. Hyungdae Kim, Youngjae Park, Hyungmo Kim, Chan Lee, Dong Wook Jerng, Dong Eok Kim, “Critical heat flux enhancement by single-layered metal wire mesh with micro and nano-sized pore structures”, International Journal of Heat and Mass Transfer, 115, pp. 439-449, 2017

16. Seok-Kyu Chang, Dong-Jin Euh, Seok Kim, Hae Seob Choi, Hyungmo Kim, Yung Joo Ko, Sun Rock Choi, Hyeong-Yeon Lee, “Experimental study of the flow characteristics in an SFR type 61-pin rod bundle using iso-kinetic sampling method”, Annals of Nuclear Energy, 106, pp. 160-169, 2017

15. Hyeong-Yeon Lee, Hyungmo Kim, Jong-Bum Kim, Ji-Young Jeong, “Design and Integrity Evaluation of a Finned-Tube Sodium-to-Air Heat Exchanger in a Sodium Test Facility”, Journal of Pressure Vessel Technology, 139, 031203, 2017

14. Youngjae Park, Hyungmo Kim, Joonwon Kim, Hyungdae Kim, “Measurement of liquid-vapor phase distribution on nano- and microstructured boiling surfaces”, International Journal of Multiphase Flow , 81, pp. 67-76, May 2016

13. Seok-Kyu Chang, Dong-Jin Euh, Hae Seob Choi, Hyungmo Kim, Sun Rock Choi, Hyeong-Yeon Lee, “Flow distribution and pressure loss in subchannels of a wire-wrapped 37-pin rod bundle for a sodium-cooled fast reactor”, Nuclear Engineering and Technology, 48, 2, pp. 376-385, April 2016

12. Hyungmo Kim, Hwang Bae, Yung Joo Ko, Sun Rock Choi, Seok-Kyu Chang, Dong-Won Lee, Hae Seob Choi, Dong-Jin Euh, Hyeong-Yeon Lee, “Investigations of single-phase flow mixing characteristics in a wire-wrapped 37-pin bundle for a sodium-cooled fast reactor”, Annals of Nuclear Energy, Vol. 87, Part 2, pp. 541-546, 2016

11. Aeree Kim, Chan Lee, Hyungmo Kim, Joonwon Kim, “Simple Approach to Superhydrophobic Nanostructured Al for Practical Antifrosting Application Based on Enhanced Self-propelled Jumping Droplets”, ACS Appl. Mater. Interfaces, 7(13), pp 7206-7213, 2015

10. Hyungmo Kim, Usung Park, Chan Lee, Hyungdae Kim, Moo Hwan Kim, Joonwon Kim, “Drop splashing on a rough surface: How surface morphology affects splashing threshold”, Appl. Phys. Lett. 104, 161608, 2014

9. Aeree Kim, Hyungmo Kim, Chan Lee, Joonwon Kim, “Effective three-dimensional superhydrophobic aerogel-coated channel for high efficiency water-droplet transport”, Appl. Phys. Lett. 104, 081601, 2014

8. Hyungmo Kim, Dasook Kim, Chan Lee, Joonwon Kim, “Laser interference lithography using spray/spin photoresist development method for consistent periodic nanostructures”, Current Applied Physics , Vol 14, Issue 2, pp. 209-214, 2014

7. Ho Seon Ahn*, Hyungmo Kim*, Ji Min Kim, Su Cheong Park, Jin Man Kim, Joonwon Kim, Moo Hwan Kim, “Controllable pore size of three dimensional self-assembled foam-like graphene and its wettability”, Carbon, 64, pp. 27-34, 2013 (*equally contributed, co-first)

6. Chan Lee, Hyungmo Kim, Ho Seon Ahn, Moo Hwan Kim, and Joonwon Kim, "Micro/nanostructure Evolution of Zircaloy Surface Using Anodization Technique: Application to Nuclear Fuel Cladding Modification", Applied Surface Science, 258(22), pp. 8724-8731, 2012

5. Hyungmo Kim, Chan Lee, Moo Hwan Kim, and Joonwon Kim, "Drop Impact Characteristics and Structure Effects of Hydrophobic Surfaces with Micro- and/or Nano-scaled Structures", Langmuir, 28(30), pp. 11250-11257, 2012

4. HangJin Jo, SeolHa Kim, Hyungmo Kim, Joonwon Kim and Moo Hwan Kim, “Nucleate boiling performance on nano/microstructure with different wetting surfaces”, Nanoscale Research Letters, Vol. 7, pp. 1-12, 2012

3. Hyungmo Kim and Joonwon Kim, "Evaporation characteristics of hydrophilic surface with micro-scale and/or nano-scale structures fabricated by sandblasting and aluminum anodization ", J. Micromech. Microeng, 20, 045008, 2010

2. Seontae Kim, Hyung Dae Kim, Hyungmo Kim, Ho Seon Ahn, Hangjin Jo, Joonwon Kim, Moo Hwan Kim, "Effects of nano-fluid and surfaces with nano structure on the increase of CHF", Experimental Thermal and Fluid Science, 34(4), 487-495, 2010

1. Hyungmo Kim, Moo Hwan Kim and Joonwon Kim, “Wettability of dual-scaled surfaces fabricated by the combination of a conventional silicon wet-etching and a ZnO solution method", J. Micromech. Microeng, 19, 095002, 2009

15. 주성재, 손지희, 장정인, 민복기, 김봉서, 홍종간, 이대근, 김형모, "소성변형을 거친 비스무스 텔루라이드 소결체의 열전특성 분석", 대한금속재료학회지, 60(10), pp.796-802, 2024

14. 남기언, 이형연, 어재혁, 김형모, 홍현욱, "신재 및 가동이력 Gr.91강의 재료강도 거동에 미치는 동적변형시효의 영향", 한국압력기기공학회, 20(1), pp.66-74, 2024

13. 임혜원, 안희학, 김형모, "분포형 광섬유 센서 기반의 절곡이 가능한 액위계 개발", 한국기계기술학회지, 26(1), pp.105-110, 2024 (Corresponding author)

12. 김혜원, 임혜원, 박정우, 이상민, 김형모, "비정형 기둥 형상을 가진 나노구조에서의 가스 투과성 실험 연구", Tribol. Lubr., Vol. 39, No. 5, pp. 197-202, 2023 (Corresponding author)

11. 김현수, 김병연, 이제환, 어재혁, 김형모, "라만 분포형 온도 센서의 노이즈 감쇄 및 측정 빈도 개선 방안",  한국기계기술학회지, 25(5), pp.810-815, 2023 (Corresponding author)

10. 정지윤, 임혜원, 김혜원, 이상민, 김형모, "히트파이프 모세관 성능 개선을 위한 스크린-메쉬 윅의 표면 개질", Tribol. Lubr., Vol. 38, No. 5, pp. 185-190, 2022 (Corresponding author)

9. 김혜원, 윤 정, 이제환, 어재혁, 김형모, “열저장장치 응용을 위한 알칼리금속 기반 정적발전유닛 온도분포 해석”, 한국기계기술학회지, 24(5), pp. 880-885, 2022 (Corresponding author)

8. 김병연, 이제환, 조영일, 어재혁, 김형모, “소듐냉각고속로를 위한 온도 영향 보정형 압력전송기 개념 개발”, 한국유체기계학회 논문집, 24(6), pp. 56-61, 2021 (Corresponding author) 

7. 이찬, 김지민, 김형모, "전기화학 에칭 공정을 이용한 스테인리스 스틸 메쉬의 방수 특성 연구", Tribol. Lubr., Vol. 37, No. 5, pp. 189-194, 2021 (Corresponding author)

6. 김형모, 고은미, 주용선, 윤정, 어재혁, 이형연, “제4세대 원자로 중간열교환기-일체형 증기발생기의 고온 설계 및 건전성 평가”, 대한기계학회 논문집 A권, 44(11), pp. 813-820, 2020

5. 윤정, 김형모, 이제환, 민재홍, “핀형 소듐-공기 열교환기의 자연순환 특성”, 한국유체기계학회 논문집, 23(5), pp. 28-35, 2020 (Corresponding author) 

4. 어동진, 장석규, 배황, 김석, 김형모, 최해섭, 최선락, 이형연, “소듐냉각고속로 부수로 해석코드 검증을 위한 37봉다발 실험방법 개념 개발”, 한국유체기계학회 논문집, 17권, 6호, 89-94, 2014

3. 김형모, 이상민, 이찬, 김무환, 김준원, “마이크로/나노 구조를 갖는 초발수성 표면의 제작 및 분사 액적의 충돌 특성 연구”, 한국정밀공학회지 , 29(9), pp. 1020-1025, 2012

2. 조항진, 김형모, 안호선, 강순호, 김준원, 신정섭, 김무환, “실리콘 표면 위에 소수성 점을 이용한 비등 열전달 증진에 관한 실험적 연구”, 대한기계학회논문집 B권 , 34(6), pp. 655-663, 2010

1. 강순호, 안호선, 조항진, 김무환, 김형모, 김준원, “개질된 표면을 이용한 풀비등 임계열유속 증진에 관련한 실험적 연구”, 대한기계학회논문집 B권, 33(11), pp. 840-848, 2009