46. Hayeol Kim, Junyoung Seo, Adrian Matias Chung Beak, Woo Yeong Shin, Hongryung Jeon, Seung Ki Moon, Hyungmo Kim, Namhun Kim and Im Doo Jung, "Direct energy deposition for smart micro reactor", Virtual and Physical Prototyping, 19, 2024 (Corresponding author)

45. Jewhan Lee, Dehee Kim, Jaehyuk Eoh, and Hyungmo Kim, "Heat Transfer Performance Tests of a Circular-Fin Sodium-to-Air Heat Exchanger for Sodium-Cooled Fast Reactors", International Jouranl of Engergy Research, 5476053, p.11, 2024 (Corresponding author)

44. Sanghyun Lee, Hyewon Kim, Hyewon Lim, Yejin Nam, Sangmin Lee, and Hyungmo Kim, "Nanostructured Substrate-Mediated Bubble Degassing in Microfluidic Systems", Langmuir, 40, p.8630-8635, 2024 (Corresponding author)

43. Seyeon Hwang, Hyewon Kim, Hyeonmin Choi, Taejoon Kim and Hyungmo Kim, "Design Evaluation of an immersion heater using a fluid with low Prandtl number based on computation fluid dynamics analysis", Journal of Mechanical Science and Technology, 38(4), p.2151-2159, 2024 (Corresponding author)

42. Jewhan Lee, Jaehong Min, Jung Yoon and Hyungmo Kim, "Experimental study of the natural convection characteristics of finned-tube sodium-to-air heat exchanger", Journal of Mechanical Science and Technology, 38(4), p.2055-2062, 2024 (Corresponding author)

41. Yong-Taek Kwon, Sanghyun Jeon, Jun Lee, Juheon Kim, Sangmin Lee, and Hyungmo Kim, "Performance Improvement of an STS304-Based Dispensing Needle via Electrochemical Etching", Micromachines, 14, 2183, p.2-12, 2023 (Corresponding author)

40. Dahoon Jeong, Seyeon Hwang, Hyewon Kim, Juheon Kim, Hyungmo Kim, "Experimental investigation of non-condensable gas effects in a natural circulation system", Journal of Mechanical Science and Technology, 37(11),  p.6057-6064, 2023 (Corresponding author)

39. Jewhan Lee , Da-Young Gam, Ki Ean Nam, Seong J. Cho, Hyungmo Kim, "Feasibility study of a resistive-type sodium aerosol detector with ZnO nanowires for sodium-cooled fast reactors", Nuclear Engineering and Technology, 55, p. 2373-2379, 2023 (Corresponding author)

38. Jewhan Lee, Jaehyuk Eoh, Jung Yoon, Seok-Kwon Son, Hyungmo Kim, "Heat transfer system design of sodium test facility STELLA-2", Annals of Nuclear Energy, 191, 109930, 2023

37. Namhyeong Kim, Jung Yoon, Jaehyuk Eoh, Moo Hwan Kim, HangJin Jo, Hyungmo Kim, "Design and Thermal-Hydraulic Evaluation of Integrated Steam Generator with Serpentine-Tube Configuration for Prevention of Sodium-Water Reaction", International Journal of Energy Research, 2825626, 2023 (Corresponding author)

36. Hayeol Kim, Jewhan Lee, Taekyeong Kim, Seong Jin Park , Hyungmo Kim, Im Doo Jung, " Advanced thermal fluid leakage detection system with machine learning algorithm for pipe-in-pipe structure", Case Studies in Thermal Engineering, 42, 102747, 2023 (Corresponding author)

35. Jung Yoon, Jewhan Lee, Jaehyuk Eoh, Hyungmo Kim, Dong Eok Kim, "Similarity evaluation of the pump simulation loop in STELLA-2 for conservation of mechanical sodium pump characteristics", Nuclear Engineering and Technology, 55, p. 353-363, 2023

34. Byeong-Yeon Kim, Jewhan Lee, Youngil Cho, Jaehyuk Eoh, Hyungmo Kim, "Performance test and uncertainty analysis of the FBG-based pressure transmitter for liquid metal system",  Nuclear Engineering and Technology,  54, p. 4412-4421, 2022

33. Jewhan Lee, Jaehyuk Eoh, Jung Yoon, Seok-Kwon Son, Hyungmo Kim, "Design of large-scale sodium thermal-hydraulic integral effect test facility, STELLA-2",  Nuclear Engineering and Technology,  54, p. 3551-3566, 2022

32. Sun Rock Choi, Hyungmo Kim, Seok-Kyu Chang, Hae Seob Choi, Dong-Jin Euh, Hyeong-Yeon Lee, Won Sik Yang, "Assessment of subchannel flow mixing coefficients for wire-wrapped hexagonal fuel rod bundles", Annals of Nuclear Energy, 166, p. 108810, 2022

31. Namhyeong Kim, Hyungmo Kim, Jaehyuk Eoh, Moo Hwan Kim, HangJin Jo, “Thermal-hydraulic design of natural circulation integratedsteam generator using design map”, Applied Thermal Engineering, 197, p. 117389, 2021

30. Jung Yoon, Jewhan Lee, Hyungmo Kim, Yong-Bum Lee, Jaehyuk Eoh, “Heat transfer characteristics of redan structure in large-scale test facility STELLA-2”, Nuclear Engineering and Technology, 53(4), p. 1109-1118, 2021

29. Hyungmo Kim, Jung Yoon, Hyeong-Yeon Lee, Jaehyuk Eoh, Ji-Young Jeong, Jewhan Lee, “Design and thermal-hydraulic evaluation of the finned-tube type sodium-to-air heat exchanger in a sodium test facility”, Nuclear Engineering and Design , 366, p. 110755, 2020

28. Namhyeong Kim, Hyungmo Kim, Jaehyuk Eoh, Moo Hwan Kim, HangJin Jo, “One-dimensional design approach to integrated steam generator with helical-coil tube bundles for a sodium-cooled fast reactor”, Nuclear Engineering and Design , 361, p. 110554, 2020

27. Seolha Kim, Usung Park, Hyungmo Kim, “Early stage of liquid drop spreading on tunable nanostructured surfaces”, Experimental Thermal and Fluid Science, 116, p. 110126, 2020 (Corresponding author) 

26. Seolha Kim, Dongseob Kim, Hyungmo Kim, “Effect of wettability on the water entry problem of aluminum spheres”, Journal of Mechanical Science and Technology, 34(3), pp. 1257-1263, 2020 (Corresponding author) 

25. Aeree Kim, Seonghyeon Kim, Myoung Huh, Hyungmo Kim, Chan Lee, “Superior anti-icing strategy by combined sustainable liquid repellence and electro/photo-responsive thermogenesis of oil/MWNT composite”, Journal of Materials Science & Technology, 49, pp. 106-116, 2020

24. Seol Ha Kim, Gicheol Lee, Hyungmo Kim, Moo Hwan Kim, “Leidenfrost point and droplet dynamics on heated micropillar array surface”, International Journal of Heat and Mass Transfer, 139, pp. 1-9, 2019

23. Jewhan Lee, Hyungmo Kim, Jaehyuk Eoh, Yohan Jung, Ji-Woong Han, Ji-Young Jeong, “Experimental study of sodium heat exchanger performance at high Pe number condition using STELLA-1 facility”, Nuclear Engineering and Design, 340, pp. 62-67, 2018 (Corresponding author) 

22. Joo Hyun Park, Jung Yoon, Jaehyuk Eoh, Hyungmo Kim, Moo Hwan Kim, “Optimization and sensitivity analysis of the nitrogen Brayton cycle as a power conversion system for a sodium-cooled fast reactor”, Nuclear Engineering and Design, 340, pp. 325-334, 2018

21. Seol Ha Kim, Yuyan Jiang, Hyungmo Kim, “Droplet impact and LFP on wettability and nanostructured surface”, Experimental Thermal and Fluid Science, 99, pp. 85-93, 2018 (Corresponding author) 

20. Sun-Joon Byun, Chang-Hwan Shin, Jung Yoon, Hyungmo Kim, Jewhan Lee, Jaehyuk Eoh, Ji-Young Jeong, “Experimental study on the heat transfer enhancement in sub-channels of 6 × 6 rod bundle with large scale vortex flow mixing vanes”, Nuclear Engineering and Design, 339, pp. 105-115, 2018

19. Jewhan Lee, Jaehyuk Eoh, Hyungmo Kim, Jung Yoon, Yong-Bum Lee, Eui-Kwang Kim, Jae-Ho Jeong, Kwi Lim Lee, Ju-Young Jeong, “Design evaluation of large-scale sodium integral effect test facility (STELLA-2) using MARS-LMR”, Annals of Nuclear Energy, 120, pp. 845-856, 2018

18. Hyungmo Kim, and Seol Ha Kim, “Nonwettable Hierarchical Structure Effect on Droplet Impact and Spreading Dynamics”, Langmuir, 34, 2018

17. Hyungdae Kim, Youngjae Park, Hyungmo Kim, Chan Lee, Dong Wook Jerng, Dong Eok Kim, “Critical heat flux enhancement by single-layered metal wire mesh with micro and nano-sized pore structures”, International Journal of Heat and Mass Transfer, 115, pp. 439-449, 2017

16. Seok-Kyu Chang, Dong-Jin Euh, Seok Kim, Hae Seob Choi, Hyungmo Kim, Yung Joo Ko, Sun Rock Choi, Hyeong-Yeon Lee, “Experimental study of the flow characteristics in an SFR type 61-pin rod bundle using iso-kinetic sampling method”, Annals of Nuclear Energy, 106, pp. 160-169, 2017

15. Hyeong-Yeon Lee, Hyungmo Kim, Jong-Bum Kim, Ji-Young Jeong, “Design and Integrity Evaluation of a Finned-Tube Sodium-to-Air Heat Exchanger in a Sodium Test Facility”, Journal of Pressure Vessel Technology, 139, 031203, 2017

14. Youngjae Park, Hyungmo Kim, Joonwon Kim, Hyungdae Kim, “Measurement of liquid-vapor phase distribution on nano- and microstructured boiling surfaces”, International Journal of Multiphase Flow , 81, pp. 67-76, May 2016

13. Seok-Kyu Chang, Dong-Jin Euh, Hae Seob Choi, Hyungmo Kim, Sun Rock Choi, Hyeong-Yeon Lee, “Flow distribution and pressure loss in subchannels of a wire-wrapped 37-pin rod bundle for a sodium-cooled fast reactor”, Nuclear Engineering and Technology, 48, 2, pp. 376-385, April 2016

12. Hyungmo Kim, Hwang Bae, Yung Joo Ko, Sun Rock Choi, Seok-Kyu Chang, Dong-Won Lee, Hae Seob Choi, Dong-Jin Euh, Hyeong-Yeon Lee, “Investigations of single-phase flow mixing characteristics in a wire-wrapped 37-pin bundle for a sodium-cooled fast reactor”, Annals of Nuclear Energy, Vol. 87, Part 2, pp. 541-546, 2016

11. Aeree Kim, Chan Lee, Hyungmo Kim, Joonwon Kim, “Simple Approach to Superhydrophobic Nanostructured Al for Practical Antifrosting Application Based on Enhanced Self-propelled Jumping Droplets”, ACS Appl. Mater. Interfaces, 7(13), pp 7206-7213, 2015

10. Hyungmo Kim, Usung Park, Chan Lee, Hyungdae Kim, Moo Hwan Kim, Joonwon Kim, “Drop splashing on a rough surface: How surface morphology affects splashing threshold”, Appl. Phys. Lett. 104, 161608, 2014

9. Aeree Kim, Hyungmo Kim, Chan Lee, Joonwon Kim, “Effective three-dimensional superhydrophobic aerogel-coated channel for high efficiency water-droplet transport”, Appl. Phys. Lett. 104, 081601, 2014

8. Hyungmo Kim, Dasook Kim, Chan Lee, Joonwon Kim, “Laser interference lithography using spray/spin photoresist development method for consistent periodic nanostructures”, Current Applied Physics , Vol 14, Issue 2, pp. 209-214, 2014

7. Ho Seon Ahn*, Hyungmo Kim*, Ji Min Kim, Su Cheong Park, Jin Man Kim, Joonwon Kim, Moo Hwan Kim, “Controllable pore size of three dimensional self-assembled foam-like graphene and its wettability”, Carbon, 64, pp. 27-34, 2013 (*equally contributed, co-first)

6. Chan Lee, Hyungmo Kim, Ho Seon Ahn, Moo Hwan Kim, and Joonwon Kim, "Micro/nanostructure Evolution of Zircaloy Surface Using Anodization Technique: Application to Nuclear Fuel Cladding Modification", Applied Surface Science, 258(22), pp. 8724-8731, 2012

5. Hyungmo Kim, Chan Lee, Moo Hwan Kim, and Joonwon Kim, "Drop Impact Characteristics and Structure Effects of Hydrophobic Surfaces with Micro- and/or Nano-scaled Structures", Langmuir, 28(30), pp. 11250-11257, 2012

4. HangJin Jo, SeolHa Kim, Hyungmo Kim, Joonwon Kim and Moo Hwan Kim, “Nucleate boiling performance on nano/microstructure with different wetting surfaces”, Nanoscale Research Letters, Vol. 7, pp. 1-12, 2012

3. Hyungmo Kim and Joonwon Kim, "Evaporation characteristics of hydrophilic surface with micro-scale and/or nano-scale structures fabricated by sandblasting and aluminum anodization ", J. Micromech. Microeng, 20, 045008, 2010

2. Seontae Kim, Hyung Dae Kim, Hyungmo Kim, Ho Seon Ahn, Hangjin Jo, Joonwon Kim, Moo Hwan Kim, "Effects of nano-fluid and surfaces with nano structure on the increase of CHF", Experimental Thermal and Fluid Science, 34(4), 487-495, 2010

1. Hyungmo Kim, Moo Hwan Kim and Joonwon Kim, “Wettability of dual-scaled surfaces fabricated by the combination of a conventional silicon wet-etching and a ZnO solution method", J. Micromech. Microeng, 19, 095002, 2009

15. 주성재, 손지희, 장정인, 민복기, 김봉서, 홍종간, 이대근, 김형모, "소성변형을 거친 비스무스 텔루라이드 소결체의 열전특성 분석", 대한금속재료학회지, 60(10), pp.796-802, 2024

14. 남기언, 이형연, 어재혁, 김형모, 홍현욱, "신재 및 가동이력 Gr.91강의 재료강도 거동에 미치는 동적변형시효의 영향", 한국압력기기공학회, 20(1), pp.66-74, 2024

13. 임혜원, 안희학, 김형모, "분포형 광섬유 센서 기반의 절곡이 가능한 액위계 개발", 한국기계기술학회지, 26(1), pp.105-110, 2024 (Corresponding author)

12. 김혜원, 임혜원, 박정우, 이상민, 김형모, "비정형 기둥 형상을 가진 나노구조에서의 가스 투과성 실험 연구", Tribol. Lubr., Vol. 39, No. 5, pp. 197-202, 2023 (Corresponding author)

11. 김현수, 김병연, 이제환, 어재혁, 김형모, "라만 분포형 온도 센서의 노이즈 감쇄 및 측정 빈도 개선 방안",  한국기계기술학회지, 25(5), pp.810-815, 2023 (Corresponding author)

10. 정지윤, 임혜원, 김혜원, 이상민, 김형모, "히트파이프 모세관 성능 개선을 위한 스크린-메쉬 윅의 표면 개질", Tribol. Lubr., Vol. 38, No. 5, pp. 185-190, 2022 (Corresponding author)

9. 김혜원, 윤 정, 이제환, 어재혁, 김형모, “열저장장치 응용을 위한 알칼리금속 기반 정적발전유닛 온도분포 해석”, 한국기계기술학회지, 24(5), pp. 880-885, 2022 (Corresponding author)

8. 김병연, 이제환, 조영일, 어재혁, 김형모, “소듐냉각고속로를 위한 온도 영향 보정형 압력전송기 개념 개발”, 한국유체기계학회 논문집, 24(6), pp. 56-61, 2021 (Corresponding author) 

7. 이찬, 김지민, 김형모, "전기화학 에칭 공정을 이용한 스테인리스 스틸 메쉬의 방수 특성 연구", Tribol. Lubr., Vol. 37, No. 5, pp. 189-194, 2021 (Corresponding author)

6. 김형모, 고은미, 주용선, 윤정, 어재혁, 이형연, “제4세대 원자로 중간열교환기-일체형 증기발생기의 고온 설계 및 건전성 평가”, 대한기계학회 논문집 A권, 44(11), pp. 813-820, 2020

5. 윤정, 김형모, 이제환, 민재홍, “핀형 소듐-공기 열교환기의 자연순환 특성”, 한국유체기계학회 논문집, 23(5), pp. 28-35, 2020 (Corresponding author) 

4. 어동진, 장석규, 배황, 김석, 김형모, 최해섭, 최선락, 이형연, “소듐냉각고속로 부수로 해석코드 검증을 위한 37봉다발 실험방법 개념 개발”, 한국유체기계학회 논문집, 17권, 6호, 89-94, 2014

3. 김형모, 이상민, 이찬, 김무환, 김준원, “마이크로/나노 구조를 갖는 초발수성 표면의 제작 및 분사 액적의 충돌 특성 연구”, 한국정밀공학회지 , 29(9), pp. 1020-1025, 2012

2. 조항진, 김형모, 안호선, 강순호, 김준원, 신정섭, 김무환, “실리콘 표면 위에 소수성 점을 이용한 비등 열전달 증진에 관한 실험적 연구”, 대한기계학회논문집 B권 , 34(6), pp. 655-663, 2010

1. 강순호, 안호선, 조항진, 김무환, 김형모, 김준원, “개질된 표면을 이용한 풀비등 임계열유속 증진에 관련한 실험적 연구”, 대한기계학회논문집 B권, 33(11), pp. 840-848, 2009

39. Hyewon Lim, HeeHak Ahn, Hyungmo Kim, "Development of a Continuous Type Liquid Level Sensor for Using an Optical Fiber",The 13th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety, Seoul, Korea, Nov 10-13, 2024.

38. Hyewon Kim, Hyeonmin Choi, Byung Ha Park, Jiyun Oh, Hyungmo Kim, "Design and Evaluation of Sodium Loop Heat Pipe",The 13th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety, Seoul, Korea, Nov 10-13, 2024.

37. Hyewon Kim, Hyeonmin Choi, Byung Ha Park, Hyungmo Kim, "Design Characteristic of a Loop-type Heat Pipe with Sodium",The 24rd International Symposium on Aerospace Technology & Manufacturing Porcess, Jinju, Korea, Oct 23-27, 2024.

36. Hyewon Kim, Hyeonmin Choi, Hyewon Lim, Byung Ha Park, Hyungmo Kim, "Steady-State Analysis of a Sodium Loop Heat Pipe by a One-Dimensional Design Code", Summer Heat Transfer Conference 2024 provided by The American Society of Mechanical Engineers, Anaheim, USA, July 15-17, 2024.

35. Hyeonmin Choi, Jiyun Oh, Hyeonsu Kim, Dong Eok Kim, Hyungmo Kim, "Observation of Pool Boiling Behaviors on a Wire by a High-Precision Distributed Temperature Sensing Technique", Summer Heat Transfer Conference 2024 provided by The American Society of Mechanical Engineers, Anaheim, USA, July 15-17, 2024.

34. Hyewon Lim, Hyewon Kim, Hyungmo Kim, "Development of a Liquid Level Indicator Using a Distributed Fiber Optic Sensor by ThermalCapacity Differences", Summer Heat Transfer Conference 2023 provided by The American Society of Mechanical Engineers, Anaheim, USA, July 15–17, 2024.

33. Hyewon Kim, Jung Yoon, Jewhan Lee, Jaehyuk Eoh, Hyungmo Kim, "Temperature Distribution Analysis of an Alkali-Metal Thermal to Electric Converter for Thermal Energy Storage", The 23rd International Symposium on Aerospace Technology & Manufacturing Process, Jinju, Korea, Nov 8-11, 2023.

32. Seyeon Hwang, Hyungmo Kim, "Development of Novel Boiling-Based Cooling Device with Non-Wettable Porous Membrane", The 16th International Symposium on Mechanics, Aerospace and Informatics Engineering 2023 (ISMAI-16 2023), Jinju, Korea, Nov 1-3, 2023.

31. Juheon Kim, Hyungmo Kim, "Design of a soft sensor to evaluate the adsorption capacity of adsorbents", The 16th International Symposium on Mechanics, Aerospace and Informatics Engineering 2023 (ISMAI-16 2023), Jinju, Korea, Nov 1-3, 2023.

30. Hyewon Kim, Hyewon Lim, Yejin Nam, Sanghyun Lee, Sangmin Lee, Hyungmo Kim, "Bubble degassing characteristics via nanostructures on the substrate of a microfluidic device", Miniaturized Systems for Chemistry and Life Sciences, Katowice, Poland, October 15-19, 2023.

29. Juheon Kim, Dhavalkumar N Joshi, Duckjong Kim, Hyungmo Kim, "Ammonia gas adsorption test using an in-situ balance sensor inside the reactor chamber", International Conference on Precision Engineering and Sustainable Manufacturing, Okinawa, Japan, July 16-21, 2023.

28. Dahoon Jeong, Seyeon Hwang, Hyewon Kim, Hyungmo Kim, Dong Eok Kim, "Natural Circulation Test and Non-Condensable Gas Effect on a Two-Phase Thermosyphon Loop", 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-20), Washington D.C., USA, Aug. 20-25, 2023.

27. Seyeon Hwang, Dahoon Jeong, Hyewon Kim, Hyungmo Kim, "Development of Novel Boiling-Based Cooling Device with Non-Wettable Porous Membrane", Summer Heat Transfer Conference 2023 provided by The American Society of Mechanical Engineers, Washington D.C., USA, July. 10-12, 2023.

26. Seyeon Hwang, Rakjun Choi, Minjae Song, Seolha Kim, Hyungmo Kim, "Channel design and thermal-hydraulic analysis of the cold plate for battery thermal management systems", 75th Annual Meeting of the American Physical Society’s Division of Fluid Dynamics, Indiana, USA, Nov. 20-22, 2022.

25. Hyewon Kim, Hyewon Lim, Jeong Woo Park, Sangmin Lee, Hyungmo Kim, "Permeability of the lateral air flow through pillar-like nanostructures for microfluidic applications", 75th Annual Meeting of the American Physical Society’s Division of Fluid Dynamics, Indiana, USA, Nov. 20-22, 2022.

24. Seyeon Hwang, Rakjun Choi, Minjae Song, Seolha Kim, Hyungmo Kim, "Channel design and thermal-hydraulic analysis of the cold plate for battery thermal management systems", The 22nd International Symposium on Aerospace Technology & Manufacturing Process, Jinju, Korea, Oct. 19-22, 2022.

23. Hyungmo Kim, Jung Yoon, Jaehyuk Eoh, Namhyeong Kim, Moo-Hwan Kim, HangJin Jo, “THERMAL-HYDRAULIC CHARACTERISTICS OF AN INTEGRATED STEAM GENERATOR FOR SODIUM FAST REACTORS", The 19th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-19), Brussels, Belgium, Mar. 6-11, 2022.

22. Hyungmo Kim, Jung Yoon, Jaehyuk Eoh, Namhyeong Kim, Moo-Hwan Kim, Dong Eok Kim, Dehee Kim, “DEVELOPMENT OF A SERPENTINE TUBE TYPE STEAM GENERATOR WITH AN INTERMEDIATE HEAT TRANSFER FLUID FOR PREVENTION OF SWR”, 18th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-18), OR, USA, Aug. 18-22, 2019.

21. Hyungmo Kim, Jaehyuk Eoh, Joonki Kim, Ji-Young Jeong, “Experimental Evaluation on Heat Transfer Characteristics of Sodium-to-Air Heat Exchanger with Helical Finned Tubes in a Cross Flow”, International Conference on Nuclear Engineering (ICONE 26), London, England, June. 22-26, 2018.

20. Jaehyuk Eoh, Jewhan Lee, Hyungmo Kim, Jung Yoon, Hyeong-Yeon Lee , Ji-Young Jeong, “Sodium Thermal-Hydraulic Test Program for Design Validation of Prototype Gen-IV Sodium-cooled Fast Reactor”,  International Congress on Advances in Nuclear Power Plants (ICAPP), NC, USA, Apr. 8-11, 2018.

19. Jewhan Lee, Hyungmo Kim, Yong-Bum Lee, Jaehyuk Eoh, Ji-Young Jeong, “MARS-LMR Node Sensitivity Analysis of Heat Exchangers in STELLA-2 Facility”, 17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH 17), Xi’an, China, Sep. 3-8, 2017.

18. Hyungmo Kim, Byeongyeon Kim, Jaehyuk Eoh, Yung Joo Ko, Byeongsu Kang, Yungil Cho, Jong-Man Kim, Min Hwan Jung, Ji-Young Jeong, “Heat Transfer Performance Test for a Sodium-to-Air Heat Exchanger with Inclined Finned-Tube Banks”, International conference on fast reactors and related fuel cycles: next generation nuclear systems for sustainable development (FR17), Yekaterinburg, Russian Federation, June 26-29, 2017.

17. J. Lee, H. Kim, Y. Lee, J. Yoon, J. Eoh, J. Jeong, “Scoping Analysis of STELLA-2 using MARS-LMR”, International conference on fast reactors and related fuel cycles: next generation nuclear systems for sustainable development (FR17), Yekaterinburg, Russian Federation, June 26-29, 2017.

16. D.-J. Euh, S.-K. Chang, H. Kim, S. Kim, S.R. Choi, H.S. Choi, H.-Y. Lee, “Experiment for PGSFR sub-assembly flow characteristics using 37-rod bundle and preliminary analysis code validation”, NUTHOS-11: The 11th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety, Gyeongju, Korea, Oct. 9-13, 2016.

15. S-K. Chang, D-J. Euh, S. Kim, H.S. Choi, H. Kim, Y.J. Ko, S.R. Choi, H-Y. Lee, “MEASUREMENTS OF FLOW RATE AND PRESSURE DROP IN SUBCHANNELS OF AN SFR TYPE 61-PIN ROD BUNDLE”, Specialist Workshop on Advanced Instrumentation and Measurement Techniques for Nuclear Reactor Thermal Hydraulics, Livorno, Italy, June 15-17, 2016.

14. Dong-Jin Euh, Seok-Kyu Chang, Hyungmo Kim, Seok Kim, Sun Rock Choi, Hyeong-Yeon Lee, “Strategy of the experiment for PGSFR core flow characteristics for validation of core thermal hydraulic design code”, The 7th China-Korea Workshop on Nuclear Reactor Thermal-Hydraulics (WORTH-7), Kunming, China, Oct. 14-17, 2015.

13. Hyungmo Kim, Dong-Won Lee, Yung Joo Ko, Seok-Kyu Chang, Sun Rock Choi, Hae Seob Choi, Hyeon Seok Woo, Dong-Jin Euh, Ji-Young Jeong, Hyeong-Yeon Lee, “Flow mixing characteristics in subchannels of a wire-wrapped 61-pin rod assembly for a sodium-cooled fast reactor”, 16th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Chicago, USA, Aug. 30-Sep. 4, 2015.

12. Seok-Kyu Chang, Dong-Jin Euh, Hae Seob Choi, Hyungmo Kim, Dong-Won Lee, Hyeong-Yeon Lee, “MEASUREMENTS OF THE FLOW DISTRIBUTION IN SUBCHANNELS OF A WIRE WRAPPED 37-PIN ROD ASSEMBLY”, 16th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Chicago, USA, Aug. 30-Sep. 4, 2015.

11. Hyungmo Kim, Hwang Bae, Seok-Kyu Chang, Dong Won Lee, Yung Joo Ko, Sun Rock Choi, Hae Seob Choi, Hyeon Seok Woo, Dong-Jin Euh, Hyeong-Yeon Lee, “Measurements of Flow Mixing Behaviors using a Wire-Mesh Sensor in a Wire-Wrapped 37-pin Rod Assembly”, XIII International Conference on Fluid Mechanics, Barcelona, Spain, Feb. 25-26, 2015.

10. Hyungmo Kim, Hwang Bae, Sun Rock Choi, Seok-Kyu Chang, Dong-Jin Euh, Hyeong-Yeon Lee, “Single-phase mixing measurements in the wire-wrapped 37-pin fuel assembly for a sodium-cooled fast reactor”, 5th International Workshop on Process Tomography, Jeju, Korea, Sep. 16-18, 2014.

9. Aeree Kim, Hyungmo Kim, and Joonwon Kim, “Effective Three-Dimensional Superhydrophobic Channel Coating Using Organically Modified Silica Aerogel”, IEEE MEMS 2013, Taipei, Taiwan, January 20-24, 2013.

8. Hyungmo Kim, Chan Lee, Moo Hwan Kim, and Joonwon Kim, “Spreading and Fragmenting Characteristics of Impacting Droplet on Micro/ Nanostructured Water-Repellent Surfaces”, The 65th Annual Meeting of the APS Division of Fluid Dynamics, San Diego, USA, November 18-20, 2012.

7. Ho Seon Ahn, Chan Lee, Hyungmo Kim, Soon Ho Kang, Hangjin Jo, Joonwon Kim, Moo Hwan Kim,  “Investigation of pool boiling CHF enhancement using surface modification”, 7th International Conference on Multiphase Flow (ICMF 2010), Tampa, USA, May 30 - June 4, 2010.

6. Hang Jin Jo, Hyungmo Kim, Ho Seon Ahn, Seontae Kim, Soon Ho Kang, Joonwon Kim and Moo Hwan Kim, “Experimental study of boiling phenomena by micro/milli hydrophobic dot on the silicon surface surface in pool boiling”, Proceedings of the Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels (ICNMM 2009), Pohang, South Korea, June 22-24, 2009.

5. Hang Jin Jo, Hyungmo Kim, Ho Seon Ahn, Seontae Kim, Soon Ho Kang, Joonwon Kim and Moo Hwan Kim, “The experimental study of CHF (Critical Heat Flux) by hydrophobic dot on the silicon surface in pool boiling”, 4th Korea-China Workshop on Nuclear Reactor Thermal Hydraulics, Jeju, Korea, May 18-20, 2009.

4. Hyungmo Kim and Joonwon Kim, “Development of a Tunable Superhydrophobic Surfaces by Dual-scale Surface Modification using Simple Silicon Wet Etching and ZnO Nanorods Formation”, MicroTAS 2008, San Diego, USA, Oct. 12-16, 2008.

3. Seontae Kim, Hyungmo Kim, Ho Seon Ahn, Hangjin Jo, Joonwon Kim and Moo Hwan Kim, "Experimental Study of Pool Boiling CHF Enhancement by Multi-scale Surface Modification", The 7th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, Operation and Safety (NUTHOS-7), Seoul, Korea, October 5-9, 2008.

2. Seontae Kim, Hyungdae Kim, Hyungmo Kim, Ho Seon Ahn, Hangjin Jo, Joonwon Kim, Moo Hwan Kim, “The effect of nano-fluids and surface with nano structure on the increase of CHF” (invited keynote paper), Proceedings of ECI International Conference on Heat Transfer and Fluid Flow in Microscale, Whistler, Canada, September 21-26, 2008

1. Seontae Kim, Hyungmo Kim, Hyungdae Kim, Ho Seon Ahn, Moo Hwan Kim, Joonwon Kim, Goon-Cherl Park, “Experimental investigation of critical heat flux enhancement by micro/nanoscale surface modification in pool boiling,” Proceedings of the Sixth International Conference on Nanochannels, Microchannels & Minichannels, Darmstadt, Germany, June 23-25, 2008.

91. 최현민, 김태준, 김형모,  "갈린스탄을 이용한 고온용 투입 히터 열유동 CFD해석", 대한기계학회  2024 추계학술발표회, Jeju, Korea, Nov 6-9, 2024.

90. 김한나, 임혜원, 안희학, 김형모,  "수평 배관 내 응축수 액위 측정 장치 설계 및 개념 검증 실험", 대한기계학회  2024 추계학술발표회, Jeju, Korea, Nov 6-9, 2024.

89. 추희제, 김한나, 신용훈, 김형모,  "소듐냉각고속로 잔열제거계통의 나선형 소듐-공기 열교환기 해석을 위한 1차원 시스템코드 모델링 및 해석", 대한기계학회  2024 추계학술발표회, Jeju, Korea, Nov 6-9, 2024.

88. 최현민, 김혜원, 어재혁, 이욱현, 주성재, 김형모,  "Modeling of Alkali-Metal Thermal to Electric Converter (AMTEC) with Thermoelectric Generator (TEG) Using OpenModelica", 한국원자력학회 2024 추계학술발표회, Changwon, Korea, Oct 23-25, 2024.

87. 김한나, 추희제, 오지윤, 임경서, 신용훈, 김형모,  "Modeling and Analysis of Finned tube-type heat Exchanger in STELLA-2 Using GAMMA+", 한국원자력학회 2024 추계학술발표회, Changwon, Korea, Oct 23-25, 2024.

86. 김형모, 전용환, 어재혁, "선진원자로 대상 산업기술과 인력양성 프로그램 개발", 대한기계학회 플랜트 부문 2024년 춘계학술대회, Jeju, Korea, May 16-17, 2024.

85. 김혜원, 최현민, 박병하, 김형모,  "고온 발전 플랜트 응용을 위한 루프히트파이프 설계 평가", 대한기계학회 플랜트부문 2024년 춘계학술대회, Jeju, Korea, May 16-17, 2024.

84. 김혜원, 최현민, 임혜원, 박병하, 김형모, "Preliminary Evaluation of a Sodium Loop Heat Pipe Design using the Lumped Model", 한국원자력학회 2024 춘계학술발표회, Jeju, Korea, May 8-10, 2024

83. 최현민, 오지윤, 김현수, 김동억, 김형모, "A Pool Boiling Experiment using a Fiber Optic Sensing Wire for Direct Measurement of Local Temperatures on a Heating Surface", 한국원자력학회 2024 춘계학술발표회, Jeju, Korea, May 8-10, 2024

82. 김혜원, 최현민, 임혜원, 박병하, 김형모, "Analysis of a Sodium Loop Heat Pipe using a Design Code", 2024 한국열물성학회 춘계학술대회, Jinju, Korea, April 4-5, 2024

81. 최현민, 김동억, 김형모, "Pool Boiling Experiment of a Fiber Optic Sensor", 2024 한국열물성학회 춘계학술대회, Jinju, Korea, April 4-5, 2024

80. 임혜원 , 김형모 "Development of a liquid level indicator using distributed fiber optic sensor by thermal capacity differences", 2024 한국열물성학회 춘계학술대회, Jinju, Korea, April 4-5, 2024. 

79. 장성아, 이상현, 김혜원, 임혜원, 남예진, 이상민, 김호진, 김형모, "다공정 나노 구조기판 기반 선택적 가스제거 기술", 한국기계가공학회 추계학술대회, Jeju, Korea, Nov 29 - Dec 2, 2023.

78. 김현수, 임혜원, 유남규, 김형모, "Phase Detection of a Condenser using a Optical Fiber Sensor with High Spatial Resolution", 한국가시화정보학회 추계학술대회, Gwangju, Korea, Nov 16-17, 2023.

77. 최현민, 류원석, 유남규, 정재호, 김형모, "히트파이프 원자로 응용을 위한 소듐 상변화 연구", 대한기계학회 2023년 추계학술대회, Incheon, Korea, Nov 1-4, 2023.

76. 김형모, 어재혁, "미래  원자력  시스템  개발  동향과  새로운  기회", 대한기계학회 플랜트부문 2023년 춘계학술대회, Jeju, Korea, July 12-15, 2023.

75. 임혜원, 정다훈, 김수빈, 박준우, 최현민, 김형모, "고정밀  분포형  광섬유  센서를  이용한  신개념  액위계  개념  개발", 대한기계학회 플랜트부문 2023년 춘계학술대회, Jeju, Korea, July 12-15, 2023.

74. 남기언, 이형연, 어재혁, 윤민수, 하승우, 김형모, "Effects of Thermal Aging on Material Behavior for Service-exposed P91 steel and P92 steel", 대한기계학회 CAE 및 응용역학부문 2023년 춘계학술대회, Busan, Korea, May 19, 2023.

73. 권용택, 주강호, 전상현, 이준, 임혜원, 박정우, 이상민, 김형모, "전기화학적 에칭을 이용한 STS304 디스펜싱 니들의 성능개선", 대한기계학회 유체공학부문 2023년 춘계학술대회, Seoul, Korea, May 17-19, 2023.

72. 남상우, 김주헌, 김형모, 이상민, "충돌 액적의 접촉 지름 변화 속도를 통한 표면 젖음성 분석", 한국정밀공학회 2023년도 춘계학술대회, Jeju, Korea, May 10-12, 2023.

71. 오지윤, 박수청, 유동인, 김형모, "표면개질을 이용한 Gr.91 강에서의 수조비등 임계열유속 증진 연구", 대한기계학회 열공학부문 2023년 춘계학술대회, Busan, Korea, April 19-22, 2023.

70. 황세연, 김혜원, 임혜원, 김태준, 김형모, "낮은 프란틀수를 가진 유체용 투입히터 설계 평가를 위한 CFD 해석", 대한기계학회 열공학부문 2023년 춘계학술대회, Busan, Korea, April 19-22, 2023.

69. 남기언, 이형연, 어재혁, 하승우, 윤민수, 김형모, "Effects of Thermal Aging on Tensile Strength of P92 Steel", 대한기계학회 신뢰성부문 2023년 춘계학술대회, Jeju, Korea, March 23, 2023.

68. 남기언, 이형연, 어재혁, 윤민수, 하승우, 김형모, "가동이력 P91강 및 P92강의 재료거동에 미치는 동동적변형시효의 영향", 대한기계학회 2022년 학술대회, Jeju, Korea, Nov 9-12, 2022.

67. 정지윤, 임혜원, 김혜원, 김형모, "미세 표면 구조에 의한 스테인리스 스틸 스크린-메쉬 윅의 모세관 성능 향상", 대한기계학회 2022년 학술대회, Jeju, Korea, Nov 9-12, 2022.

66. 정재헌, 김주헌, 정경은, 이경준, 김형모, "전기화학적  식각에  의한  Gr. 91  강의  표면  개질  연구", 대한기계학회 2022년 학술대회, Jeju, Korea, Nov 9-12, 2022.

65. 정다훈, 김주헌, 김덕종, 김형모, "미소  무게  변화  측정  장치가  내장된  흡탈착  성능  시험  시스템  개발", 대한기계학회 2022년 학술대회, Jeju, Korea, Nov 9-12, 2022.

64. 김주헌, 정다훈, 김덕종, 김형모, "시료의  미소  무게  변화  측정을  위한  챔버  내장형  판형  스프링  설계", 대한기계학회 2022년 학술대회, Jeju, Korea, Nov 9-12, 2022.

63. 김주헌, 김시후, 전영탁, 이상민, 이찬, 김형모, “전기화학 에칭 공정을 이용한 Gr.91 강 미세 표면구조 형성 및 젖음성 변화 연구”, 한국정밀공학회 2022년도 춘계학술대회, Jeju, Korea, May 11-13, 2022.

62. 정지윤, 이찬, 이상민, 김형모, “전기화학 에칭 공정을 이용한 스테인리스 스틸 스크린 메쉬 윅의 젖음성과 모세관 성능에 관한 실험적 연구”, 한국정밀공학회 2022년도 춘계학술대회, Jeju, Korea, May 11-13, 2022.

61. 김혜원, 김나연, 강동관, 이상민, 김형모, “비정형 기둥 형상의 나노 표면 구조에서의 가스 투과성 실험 연구”, 한국정밀공학회 2022년도 춘계학술대회, Jeju, Korea, May 11-13, 2022.

60. 김형모, 이제환, 어재혁, “소듐냉각고속로 안전성 향상을 위한 열교환기 기술 개발”, 대한기계학회 플랜트부문 2022년 춘계학술대회, Gwangju, June 9-10, 2022.

59. 김형모, “Drop Impact Dynamics on Micro/Nanostructured Surfaces”, 마이크로나노시스템학회 2021년도 추계학술대회, Taean, Korea, Nov 11-12, 2021.

58. 김형모, “Wettability Study on Micro/Nanoscale-Structured Surfaces”, 한국트라이볼로지학회 2021년도 추계학술대회, Jeju, Korea, Oct 20-22, 2021.

57. Hyungmo Kim, “Study of Transient Analysis for an Integrated Steam Generator for Sodium-Cooled Fast Reactors”, 대한기계학회 열공학부문 2021년 춘계학술대회, Jeju, Korea, May 28, 2021.

56. Hyungmo Kim, Byeong-Yeon Kim, Youngil Cho, Ji-Young Jeong, Jewhan Lee, “Experimental Performance Evaluation of a Forced Draft Sodium-to-Air Heat Exchanger in a Cross Flow”, 대한기계학회 열공학부문 2021년 춘계학술대회, Jeju, Korea, May 28, 2021.

55. Jewhan lee, Yong-Bum lee, Jung yoon, Hyungmo Kim, “Decay Heat Removal System Cooling Effect Analysis of STELLA-2 using MARS-LMR”, Transactions of the Korean Nuclear Society Fall Meeting, Changwon, Korea, Oct 21-23, 2020.

54. Hyungmo Kim, Yongsun Ju, Eunmi Ko, Namhyeong Kim, Jung Yoon, Jaehyuk Eoh, HangJin Jo, “Stress Analysis of an IHX-Combined Steam Generator with Serpentine Tube Bundles”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, July 8-10, 2020.

53. Byeong-Yeon Kim, Hyungmo Kim, Youngil Cho, and Jewhan Lee, “Proof of Concept Test of FBG (Fiber Bragg Grating)-based Pressure Transmitter”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 21-22, 2020.

52. 김형모, 김대희, 어재혁, 윤정, 이형연, 홍종간, “에너지 변환과 저장을 위한 액체금속로 기술 소개”, 대한기계학회 2019년도 추계학술대회, 제주, Nov 13-16, 2019.

51. 김형모, 김병연, 조영일, 정지영, 이제환, “강제대류 직교류식 소듐-공기 열교환기 성능 실험”, 대한기계학회 2019년도 추계학술대회, 제주, Nov 13-16, 2019.

50. Hyungmo Kim, Namhyeong Kim, Jung Yoon, Dong Eok Kim, Jaehyuk Eoh, Moo-Hwan Kim, “Three-dimensional Analysis of Thermal-Hydraulic Characteristics on an Integrated Steam Generator with Serpentine Tube Bundles”, Transactions of the Korean Nuclear Society Autumn Meeting, Goyang, Korea, Oct 24-25, 2019.

49. Hyungmo Kim, Jung Yoon, Jaehyuk Eoh, Namhyeong Kim, Moo-Hwan Kim, Dong Eok Kim, “Thermal-Hydraulic Performance Analysis of an IHX-Combined Steam Generator with Serpentine Tube Bundles”, 한국원자력학회 창립 50주년 기념 학술대회, 제주, May 22-24, 2019.

48. Dehee Kim, Hyungmo Kim, Sun Rock Choi, “Pressure Loss Characteristics of a Finned-tube Heat Exchanger in PGSFR”, 한국원자력학회 창립 50주년 기념 학술대회, Jeju, May 22-24, 2019.

47. Byeong-Yeon Kim, Hyungmo Kim, Youngil Cho, Jewhan Lee, “Performance Test of Temperature Compensated Type Pressure Transmitter”, Transactions of the Korean Nuclear Society Autumn Meeting, Goyang, Korea, Oct 24-25, 2019.

46. Hyungmo Kim , Byeong-Yeon Kim, Youngil Cho, Joonki Kim, Ji-Young Jeong, “Performance Tests on a Forced-Draft Sodium-to-Air Heat Exchanger”, Transactions of the Korean Nuclear Society Autumn Meeting, Yeosu, Korea, Oct 25-26, 2018.

45. Hyungmo Kim, Namhyeong Kim, Dehee Kima, Jung Yoon, Dong Eok Kim, Jaehyuk Eoh, Moo-Hwan Kim, “Development of a Thermal-Hydraulic Analysis Code for an IHX-Combined Steam Generator with Serpentine Tube Bundles”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 17-18, 2018.

44. Joonki Kim, Hyungmo Kim, Youngchul Jo and Ji-Young Jun, “Experimental Investigation of Heat Loss on a Heat Exchanger in a Sodium Test Facility”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 17-18, 2018.

43. Namhyeong Kim, Hyungmo Kim, Dehee Kim, Jung Yoon, Jaehyuk Eoh and Moo-Hwan Kim, “Development of a One-Dimensional Analysis Code for Integrated Steam Generator with Helical Tubes Using a Three-Fluid Heat Transfer System”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 17-18, 2018.

42. Jung Yoon, Jaehyuk Eoh, Hyungmo Kim, Dong Eok Kim, Moohwan Kim, “Design Characteristics of N2 Brayton Cycle Power Conversion System coupled with an SFR in terms of Thermal Balance and Cycle Efficiency”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 17-18, 2018.

41. 김형모, 김병연, 어재혁, 정지영, “핀-튜브 군(群)을 가지는 소듐-공기 열교환기 성능실험의 측정 불확실도 평가”, 대한기계학회 2017년도 추계학술대회, 제주, Nov 1-3, 2017.

40. Sun-Joon Byun, Jung Yoon, Hyungmo Kim, Ji-Young Jeong, “Experimental Study on the Heat Transfer Enhancement in Sub-Channels of 6×6 Rod Bundle with Large Scale Vortex Flow Mixing Vanes”, Transactions of the Korean Nuclear Society Autumn Meeting, Gyeongju, Korea, Oct 26-27, 2017.

39. Sang-Min Park, Youngchul Jo, Jaehyuk Eoh, Jung Yoon, Hyungmo Kim, Ji-Young Jeong, “Evaluation on Cooling Performance of Vessel Air Cooling System with flow guide for STELLA-2”, Transactions of the Korean Nuclear Society Autumn Meeting, Gyeongju, Korea, Oct 25-27, 2017.

38. Jaehong Min, Hyungmo Kim, Jaehyuk Eoh, Weon Gyu Shin, Ji-Young Jeong, “Experimental Study on Natural Convection Air Flow Characteristics in a Finned-tube type Sodium-to-Air Heat Exchanger System”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 18-19, 2017.

37. Hyungmo Kim, Namhyeong Kim Jung Yoon, Dong Eok Kim, Jaehyuk Eoh, Moo-Hwan Kim, “Preliminary Design Evaluation of IHTS-Combined Steam Generator Concepts for a Sodium-cooled Fast Reactor”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 18-19, 2017.

36. Joonki Kim, Hyungmo Kim, Ji-Young Jeong, “Experimental Evaluation of Heat Loss Characteristics in Thermally-insulated Piping System of a Sodium Test Facility”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 18-19, 2017.

35. Byeong-Yeon Kim, Hyungmo Kim, Youngil Cho, Jong-Man Kim, Yung Joo Ko, Minhwan Jung, Ji-Young Jeong, “Performance Test of Electromagnetic Flow Meter in Sodium thermal hydraulic Experiment Loop for Finned-tube sodium-to-Air heat exchanger (SELFA)”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 18-19, 2017.

34. Jung Yoon, Jaehyuk Eoh, Hyungmo Kim, Dong Eok Kim, Moo Hwan Kim, “Development of Computational Code for Heat Balance Analysis in N2 Brayton Cycle Power Conversion System coupled with an SFR”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 18-19, 2017.

33. 민재홍, 김형모, 어재혁, 이호세, 정지영, 신원규, “1차원 전산해석 모델링을 통한 핀(fin)형 소듐-공기 열교환기의 성능 평가”, 대한기계학회 2016년도 추계학술대회, 정선, Dec. 14-16, 2016.

32. 김형모, 이제환, 어재혁, 정지영, “세 개의 핀-튜브 군(群)을 가지는 교차유동 소듐-공기 열교환기 성능해석을 위한 새로운 1차원 전산해석 모델링 접근법”, 대한기계학회 2016년도 추계학술대회, 정선, Dec. 14-16, 2016.

31. Chungho Cho, Ho-Yun Nam, Jong-Man Kim, Yung Joo Ko, Byeongyeon Kim, Youngil Cho, Jeahyuk Eoh, Jung Yoon, Hyungmo Kim, Hyeong-Yeon Lee, Yong Bum Lee, Ji-Young Jeong, Jong-Bum Kim, “Conceptual Design of Liquid Sodium Charging and Draining System of STELLA-2”, Transactions of the Korean Nuclear Society Autumn Meeting, Gyeongju, Korea, Oct. 27-28, 2016.

30. Jewhan Lee, Hyungmo Kim, Yong-Bum Lee, Jung Yoon, Jaehyuk Eoh, Ji-Young Jeong, “Transient Analysis of STELLA-2 using MARS-LMR”, Transactions of the Korean Nuclear Society Autumn Meeting, Gyeongju, Korea, Oct. 27-28, 2016.

29. Byeong-Yeon Kim, Hyungmo Kim, Youngil Cho, Jong-Man Kim, Yung Joo Ko, Byeong Su Kang, Min-Hwan Jung, Ji-Young Jeong, “Instrumentation and Control Systems for Sodium thermal hydraulic Experiment Loop for Finned-tube sodium-to-Air heat exchanger (SELFA)”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 12-13, 2016.

28. Seok-Kwon Son, Hyeong-Yeon Lee, Hyungmo Kim, Dong-Won Lim, Ji-Young Jeong, “Evaluation of high-temperature piping system in a sodium test facility of the SELFA”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 12-13, 2016.

27. Hyungmo Kim, Byeong-Yeon Kim, Yung Joo Ko, Youngil Cho, Jong-Man Kim, Seok-Kwon Son, Youngchul Jo, Byeong Su Kang, Minhwan Jung, Jaehyuk Eoh, Hyeong-Yeon Lee, Ji-Young Jeong, “Design Evaluation of Thermal-hydraulic Test Facility for a Finned-tube Sodium-to-Air Heat Exchanger”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 12-13, 2016. (Invited)

26. 이형연, 김형모, 김종범, 정지영, “소듐시설 내 핀형 소듐-공기 열교환기의 고온 건전성 평가”, 대한기계학회 재료 및 파괴부문 2016 춘계학술대회, 제주, April 7-8, 2016.

25. 어동진, 장석규, 김형모, 김석, 최해섭, 최선락, 이형연, “CFD검증을 위한 SFR 37봉다발 부수로 단열 유동특성 실험”, 한국전산유체공학회 춘계학술회의, 제주, May 13-15, 2015.

24. 김형모, 김석, 배황, 고영주, 최해섭, 장석규, 어동진, 이형연, 정지영, “와이어 메쉬 센서를 이용한 소듐냉각고속로 37봉다발 부수로 유동 혼합의 실험적 측정”, 대한기계학회 창립70주년 기념 학술대회, 제주, Nov. 10-14, 2015.

23. Youngil Cho, Jong-Man Kim, Youngju Ko, Hyungmo Kim, Dongwon Lee, Chungho Cho, Min-Hwan Jung, Jewhan Lee, Da-Young Gam, Ji-Young Jeong, “Feasibility test of NaK filled pressure transducers for sodium test facility”, Transactions of the Korean Nuclear Society Autumn Meeting, Gyeongju, Korea, Oct. 29-30, 2015.

22. Hyungmo Kim, Jaehyuk Eoh, Yung Joo Ko, Youngil Cho, Jong-Man Kim, Hyeong-Yeon Lee, Ji-Young Jeong, “Design Features of the Separate Effect Test Facility for a Forced-Draft Sodium-to-Air Heat Exchanger (FHX) with Helical Finned Tubes”, Transactions of the Korean Nuclear Society Autumn Meeting, Gyeongju, Korea, Oct. 29-30, 2015.

21. Youngchul Jo, Sukkwon Son, Hyungmo Kim, Jaehyuk Eoh, Jiyoung Jeong, “Numerical Analysis of Flow Distribution in a Sodium Chamber of a Finned-tube Sodium-to-Air Heat Exchanger”, Transactions of the Korean Nuclear Society Autumn Meeting, Gyeongju, Korea, Oct. 29-30, 2015.

20. 장석규, 어동진, 최해섭, 김형모, 고영주, 이동원, 이형연, 최선락, “액체금속 노심 61봉 핵연료집합체의 유동분포 특성실험”, 한국유체기계학회 하계학술대회, 제주, Dec. 2-4, 2015.

19. S.K. Chang, D.J. Euh, H.S. Choi, H.M. Kim, Y.J. Ko, D.W. Lee, H.Y. Lee, S.R. Choi, “Hydrodynamic Experiments for a Flow Distribution of a 61-pin Wire-wrapped Rod Bundle”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 7-8, 2015.

18. Yung-Joo Ko, Jae-Hyuk Eoh, Dong Eok Kim, Hyungmo Kim, Dong-Won Lee, Ji-Young Jeong, Hyeong-Yeon Lee, “Basic Design of Experimental Facility for Measuring Pressure Drop of IHX in a SFR”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 7-8, 2015.

17. Dong Won Lee, Hyungmo Kim, Yung Joo Ko, Hae Seob Choi, Dong-Jin Euh, Ji-Young Jeong and Hyeong-Yeon Lee, “Measurements of Flow Mixing at Subchannels in a Wire-Wrapped 61-Rod Bundle for a Sodium Cooled Fast Reactor”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 7-8, 2015.

16. 어동진, 장석규, 김석, 최해섭, 김형모, 배황, 고영주, 이동원, 우현석, 이형연, “소듐냉각고속로 부수로 해석코드 검증을 위한 37봉다발 유동분포 실험개념”, 한국유체기계학회 학술대회, 부산, Nov. 26-28, 2014.

15. Seok Kim, Hae Seob Choi, Sun Rock Choi, Hyungmo Kim, Dong-Jin Euh, Hyeong-Yeon Lee, “Experimental Study on the Thermal Mixing Characteristics of the Wire Wrapped 37 Rods Using LIF Technique”, 제8회 한국유체공학학술대회, 부여, Aug. 27-29, 2014.

14. Dong-Won Lee, Hyungmo Kim, Yung-Joo Ko, Seok-Kyu Chang, Hae Seob Choi, Dong-kin Euh,  Hyeong-Yeon Lee, “Design Improvement of Iso-Kinetic Flow Sampling Device at Subchannel in a Wire-Wrapped 37-pin Fuel Assembly for a Sodium Cooled Fast Reactor”, Transactions of the Korean Nuclear Society Autumn Meeting, Pyeongchang, Korea, Oct. 30-31, 2014.

13. Youngjae Park, Hyungmo Kim, Joonwon Kim, Hyungdae Kim, “High-speed infrared thermography for the measurement of microscopic boiling parameters on micro- and nano-structured surfaces”, Transactions of the Korean Nuclear Society Autumn Meeting, Pyeongchang, Korea, Oct. 30-31, 2014.

12. Hyungmo Kim, Hwang Bae, Seok-Kyu Chang, Sun Rock Choi, Dong Won Lee, Yung Joo Ko, Hae Seob Choi, Dong-Jin Euh, Hyeong-Yeon Lee, “Measurements of flow mixing at subchannels in a wire-wrapped 37-rod bundle for a sodium cooled fast reactor”, Transactions of the Korean Nuclear Society Autumn Meeting, Pyeongchang, Korea, Oct. 30-31, 2014.

11. Seok Kim, Hae Seob Choi, Sun Rock Choi, Hyungmo Kim, Hwang Bae, Seok-Kyu Chang, Dong-Jin Euh, Hyeong-Yeon Lee, “Experimental Investigation on the Thermal Mixing Characteristics of the Wire Wrapped 37 Rods Using a Laser Induced Fluorescence Technique”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 29-30, 2014.

10. Hyungmo Kim, Seok-Kyu Chang, Dong Won Lee, Hae Seob Choi, Dong-Jin Euh, Hyeong-Yeon Lee, “Measurement of flow distribution at subchannels in a wire-wrapped 37-rod bundle for a sodium cooled fast reactor”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 29-30, 2014.

9. Hwang Bae, Hyungmo Kim, Dong Won Lee, Hae Seob Choi, Sun Rock Choi, Seok-Kyu Chang, Seok Kim, Dong-Jin Euh, Hyeong-Yeon Lee, “Preliminary single-phase mixing test using wire mesh system in a wire-wrapped 37-rod bundle”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 29-30, 2014.

8. Dong-Won Lee, Hyungmo Kim, Hyeong-Yeon Lee, “High temperature stress analysis on 61-pin test assembly for reactor core sub-channel flow test”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 29-30, 2014.

7. 이형연, 이동원, 김형모, “소듐 시험루프 내 고온 압력용기의 건전성 평가”, 대한기계학회 CAE 및 응용역학 춘계학술대회, 제주, April 30 - May 3, 2014.

6. 박영재, 김형모, 김준원, 김형대, “고속 적외선 열화상 기법을 이용한 마이크로/나노 구조표면에서의 미시적 비등 인자들의 측정”, 대한기계학회 2013년도 학술대회, 정선, Dec. 18-20, 2013.

5. 김형모, 이상민, 이찬, 김다숙, 김준원, “마이크로/나노 사이즈 구조를 갖는 극발수 특성의 초소수성 표면 개발”, The 14th Korean MEMS Conference, 제주, April 5-7. 2012.

4. 최인호, 김형모, 이상민, 김준원, “미세 구조물을 가지는 비젖음성 표면에서의 고점도 액적의 움직임”,　The 14th Korean MEMS Conference, 제주, April 5-7. 2012.

3. 김형모, 김준원, “마이크로/나노 사이즈 구조를 갖는 고효율 증발 표면의 개발”, 대한기계학회 마이크로/나노공학 부문 춘계학술대회, 대전, May 6-7, 2010.

2. Hang Jin Jo, Hyungmo Kim, Ho Seon Ahn, Seontae Kim, Soon Ho Kang, Joonwon Kim and Moo Hwan Kim, “The nucleate boiling heat transfer by the hydrophobic milli-dot on the silicon surface”, Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 22, 2009.

1. 김선태, 김형모, 안호선, 조항진, 김준원, 김무환, “마이크로/나노 사이즈의 표면 개질을 통한 풀 비등 임계열유속 향상을 위한 실험적 연구”, 대한기계학회 열공학부문/유체공학부문 춘계학술대회, 정선, April 23-25, 2008.

21. 고순도 소듐 주입장치, 10-2024-0107431(출원번호), 2024-08-12(출원일자), 발명자: 김형모, 김혜원, 최현민, 이제환, 신용훈, 어재혁, 윤정

20. 분포형 광섬유 센서 기반의 수평 배관 유체 건도 측정 장치, 10-2024-0060098(출원번호), 2024-05-07(출원일자), 발명자: 김형모, 임혜원, 김한나, 오지윤, 김현수, 허윤, 한승훈, 박준수

19. 분포형 광섬유 센서 기반의 액위계를 지지하는 구조물, 10-2023-0192798(출원번호), 2023-12-27(출원일자), 발명자: 김형모, 임혜원, 정다훈, 김수빈, 박준우, 최현민

18. 봉형 히터의 열유속 교정장치, 10-2023-0192718(출원번호), 2023-12-27(출원일자), 발명자: 김형모, 김태준, 최현민, 황세연

17. 전기화학적 에칭 공정을 이용한 디스펜싱 니들의 미세 표면구조 형성 및 이를 통한 성능개선, 10-2023-0171140(출원번호), 2023-11-30(출원일자), 발명자: 김형모, 권용택, 이준, 전상현, 주강호, 임혜원, 황세연

16. 비습윤성 다공막을 이용한 방열 유닛 및 이를 포함하는 열관리 장치, 10-2022-0184151(출원번호), 2022-12-26(출원일자), 발명자: 김형모, 김혜원, 정지윤, 황주현

15. 표면 개질 크롬-몰리브덴 합금강 및 전기화학적 식각을 이용한 크롬-몰리브덴 합금강 표면 개질 방법, 10-2022-0146018(출원번호), 2022-11-04(출원일자), 발명자: 김형모, 김주헌, 전영탁, 김시후, 정재헌

14. 정전용량 기반 무게 측정장치, 이를 포함하는 흡탈착 반응기 및 실험장치, 10-2022-0123094(출원번호), 2022-09-28(출원일자), 발명자: 김형모, 김덕종, 김주헌, 정다훈 

13. PIP의 누출 위치 감지 장치 및 감지 방법, 10-2022-0060061(출원번호), 2022-05-17(출원일자), 발명자: 정임두,김하열, 김태경, 이제환, 김형모

12. 다공성 나노구조부를 포함하는 미세유체 칩 및 이의 제조방법, 10-2724057(등록번호), 2024-10-25(등록일자), 발명자: 김형모 김혜원 이상민 강동관 김나연 

11. 압력 트랜스미터, 10-2258580(등록번호), 2021-05-25(등록일자), 발명자: 김형모, 조영일, 이제환, 김병연

10. 소듐 누설 감지 장치 및 방법, 10-2195844(등록번호), 2020-12-21(등록일자), 발명자: 감다영, 정민환, 이형연, 김병연, 김종만, 김형모, 정지영

9. 액체 금속용 압력 트랜스미터,10-2132238(등록번호), 2020-07-03(등록일자), 발명자: 김형모, 이제환, 조영일, 정지영

8. 압력 트랜스미터, 10-1996987(등록번호), 2019-07-01(등록일자), 발명자: 김형모, 조영일, 김준기, 이제환, 정지영

7. 개방유로에서의 유량측정 시스템, 10-1635555(등록번호), 2016-06-27(등록일자), 발명자: 장석규, 어동진, 배황, 최해섭, 이형연, 고영주, 김형모

6. 유로형상 보전 등속채취 프로브, 10-1619890(등록번호), 2016-05-03(등록일자), 발명자: 장석규, 어동진, 배황, 최선락, 최해섭, 이형연, 김형모

5. 4축 프로브 이송시스템, 10-1597989(등록번호), 2016-02-22(등록일자), 발명자: 장석규, 어동진, 최해섭, 이형연, 김형모, 고영주, 이동원

4. 在含错核燃料棒覆层表面上形成微细凹凸结构的方法*, CN 102414 758 A, 2012-04-11, Inventor: Chan Lee, Hyungmo Kim, Joonwon Kim, Moo Hwan Kim

3. METHOD FOR FORMING FINE PROTRUSIONS ON CLADDING SURFACE OF NUCLEAR FUEL ROD CONTAINING ZIRCONIUM*, Application No. 09844360.9, 2012-03-14, Inventor: Chan Lee, Hyungmo Kim, Joonwon Kim, Moo Hwan Kim

2. Method for forming roughness on surface of nuclear fuel rod cladding including zirconium*, US 2012/0045030 A1, 2012-02-23, Inventor: Chan Lee, Hyungmo Kim, Joonwon Kim, Moo Hwan Kim

1. 지르코늄을 포함하는 핵연료봉 클래딩 표면의 미세요철 형성방법, 10-2009-0038948(출원번호), 2010-11-12(출원일자), 발명자: 이찬, 김형모, 김준원, 김무환